Trailer Electric Brakes
Convertible Water Jet Pump delivers up to 40,000 psi.
Trailer-mounted for portability, with 4-wheel electric brakes and DOT lighting package, NLB 325 Series water jet pump can be converted in just 30 min to operate at 8,000, 10,000, 12,000, 15,000, 20,000, 24,000, or 40,000 psi. Plunger pump design reduces wear and downtime, while simplifying maintenance. Pump is available in 14 configurations, with flows from 12-74 gpm and heavy-duty diesel ...
 |
 NO RESERVE31ft FLEETWOOD HUGE SLIDE SLPS 8 CLEAN AZ  US $23,800.00
|
 35 FT GOOSENECK TRAILER EQUIPMENT HAULER NO RESERVE US $2,025.00
|
 40 Dual Car Trailer Elect Winch Tool Boxes Race Car US $4,050.00
|
 PACE 85x24 Enclosed Cargo Trailer Car Hauler SHADOW GT US $12,100.77 |
 1999 Airstream 27 Safari travel trailer US $14,900.00
|
 16 ft Scamp Travel Trailer 1996 US $6,500.00
|
 2007 JAG BY K Z 25JS RV TRAVEL TRAILER $6900 LOOK US $6,990.00
|
 1997 Freightliner and 1987 Mate 39 Trailer US $3,050.00
|
 1993 Coachmen Santara Diesel Pusher Motor Home US $9,600.00
|
 45 TANDEM DUAL GOOSENECK 12K AXLES HYD BRAKES US $6,100.00 |
 Aluminum Stock Trailer Double Deck US $7,877.00 |
 AIRSTREAM LIMITED 35ft Sleeps 4 No Reserve US $9,000.00
|
Working in the cable installation industry implies to work with different pieces of equipment that can go from a simple screwdriver to big cable drum stands used to carry cables. It also means using arc flash PPE or arc flash protection clothing as working around electric cables and electricity can be very dangerous.
Some of the equipment you may also come across is a drum cradle. This is part of the drum handling equipment you will certainly need to manipulate drum and of course use the cable on the drum.
Drum cradles and more particularly flatbed railway drum cradles are specially made to help move a drum and unroll or roll the cable around it to then use it. Those railway drum cradles have been designed to be mainly used on the rail network and when cable installation is needed around rails.
The braking system in those drum cradles includes different elements that guarantee full pressure stringing of the cable used. It is also galvanized to prevent the metal and whole structure of the cradle from rusting and being corroded by the rain for instance. It also has strong brakes to make sure the whole structure does not move on the rails while being used to install, repair or replace cables.
It also exists less advanced types of drum cradles that are only used to carry smaller drums from one place to another in a factory or a storage facility.
When used near a source of electricity, it is important, because it is made of conducting materials, to wear arc flash protection clothing even if the handles for example are usually protected by insulated plastic.
A lot of companies working in the cable installation field also use other more high tech equipment like rugged laptops and probably equipment to measure the electric intensity around a cable or a pole or even something to check if there is no problem on current cables.
Obviously, a cradle is not something you would use to carry drums. You would need a drum trailer to carry the cable drum from one point to the working area but then you would need a big cradle like one we have just talked about to put it into action, especially if the work is done on the rail network. On top of that, different other pieces of equipment would have to be used to ensure of a well done and safe job.
Posted in 
Tags: 