Dry Van Trailer

Dry Van Trailer
Still digging out
Right Angle Construction Foreman Dennis Curley was carrying twoboxes of pizza toward workers shoveling the roof of the Radio Shackon Fourth Street when a nearby shop owner approached, asking aboutcontacting someone for the leaks now evident from the roof of herstore.

Slingshot 32QB Bunkhouse Travel Trailer under 5000lbs 2011 Blowout Model SAVE
Slingshot 32QB Bunkhouse Travel Trailer under 5000lbs 2011 Blowout Model SAVE
Paypal   US $4,050.00
1997 Trailmobile 53 Foot Dry Van
1997 Trailmobile 53 Foot Dry Van
Paypal   US $2,025.00
2002 great dane dry van
2002 great dane dry van
Paypal   US $2,500.00
1998 freightliner tractordrom box and 48 ft 1994 trailmobile trailer
1998 freightliner tractordrom box and 48 ft 1994 trailmobile trailer
Paypal   US $13,350.00
2003 Great Dane Trailers 45 x 96 Airride Roll Door Two Side Doors
2003 Great Dane Trailers 45 x 96 Airride Roll Door Two Side Doors
   US $4,400.00
53 VANGUARD DRYVAN VXP AIR RIDE
53 VANGUARD DRYVAN VXP AIR RIDE
Paypal   US $21,500.00
1993 GMC Topkick 6500 28 Fruehauf Dry Van Trailer Package 427 gas standard
1993 GMC Topkick 6500 28 Fruehauf Dry Van Trailer Package 427 gas standard
   US $3,400.00
1998 Great Dane Dry Van Trailer 53
1998 Great Dane Dry Van Trailer 53
Paypal   US $5,000.00

How many pallets fit in a 48' and 53' truck?

I'm learning the trucking business and want to know how many pallets will fit in a 48 ft (basic dry van) and a 53 ft truck. Also, if you do know can you break it down - as in I know you can 'pinwheel', go straight in, and put one row sideways. I also know some Trailers are 102" and I think 98" so that makes a difference too. Is there anyway to find this info and have it all make sense? Thanks

The standard size for a pallet is 48x45. In a 53 foot truck you can fit 26 pallets in total, 13 on each side. double stacked that's 52.
In a 48 foot truck its 24 skids, 12 on each side. double stacked that's 48. This is will all pallets loaded side ways. The pin wheel method is only worth doing if the load is double stacked and unstableand needs to be loaded tightly. If the load is stable enough loading them all on sideways is just fine and not so time consuming.
Good Luck.

Tags: , , , , , , , , , , ,

Leave a Reply